Ground Coat Enamel Frit
Ground coat enamel frit is mainly used in low carbon steel plate, with very good adhesion and wide firing temperature range.It can be single used, and can be also mixed with other ground coat frits according to firing temperature required
Inquiry now Free sample Leave messageNolifrit Ground Coat Enamel Frit Features::
1, With very good adhesion, can dissolve much iron oxide in metal surface, makes very strong combination with metal body.
2, Can be combined with cover coat in high level.
3, With very good elasticity and compressive strength. Prevent and decrease damage due to mechanical stress.
4, With less viscosity and surface tension, it’s good for escape of gas when firing. Reduce bubbles on cover coat.
To ensure the smooth surface of enamel products.
5, With suitable expansion coefficient similar as steel plate.
Milling Ratio of ground coat enamel frit:
Enamel frit
100
Quartz powder
0-8
Sodium Nitrite
0.2-0.3
Clay
5-7
Borax
0.3-0.5
Water
50-55
Enamel Slurry Fineness
150mesh(0.5-1.0g residues/100ml)
Specific Gravity
160-170g/100ml
Nolifrit is the leader manufacturer of enamel frits & inorganic pigment in China.
Now we have annual capacity of:
- 30,000 M/T enamel frits,
- 10,000 M/T RTU(Ready to use) powder and electrostatic powder,
- 2,000 M/T inorganic pigments.
Our main products of enamel frits including ground coat, cover coat, transparent frit , matt enamel, direct on black frits and various cast-iron frits. High temperature inorganic pigment including red & yellow, blue, green, black Oxide etc, widely used in porcelain enamel, ceramics, glass, coating, painting etc.
As an ISO9001:2008 certified manufacturer, we have strict quality control in the whole production process to guarantee the quality of products. We are supplying the best service for customer.
100% of Our goods are exporting to USA, Europe, Middle East, Southeast Asia, South America, & Africa.
For enamel coating problems, you must be troubled!
Bad Surface Appearance: Black dot on white cover coat
Weak Adhesion Low impact resistance, easily broken
Fish-scale problem
For bad coating, Nolifrit can solve it!
No black dot
Strong adhesion
No fish-scale
Nolifrit Advantages
23 Years of Technical Accumulation
30,000 MT Enamel Frit Annual Capacity
500 Customers over the world
Exported to 30 Countries and Areas
Cooperation Partners
Customer Evaluations
Professional BBQ Manufacturer in North America Mr. Jacky .Carl
We bought from Ferro(USA) before, and we started to try Nolifrit 10 years ago, then I never going to change supplier again. Nolifrit enamel frit quality stable , and their technical support without any delay. The most important is that they help us to save more than 20% enamel raw material cost, which makes us more competitive in the market.
The Most Famous Cast Iron Enamel Cookware Manufacturer in Europe Ms. Rose . Diane